|
||||
 |
|
 |
|
||||||||||||||||||
|
|
| ||||||||||||||||||||||||||||
|
|
Alignment and Corner Balancing
Tach It Up Motorsports is proud to offer the Hunter R811 with DSP 600 sensors. The latest and greatest in alignment technology
Alignment Street Car- We first install ballast to simulate drivers weight. We then perform a complete four wheel alignment setting caster, camber and toe to exact measurements. (within spec is just not good enough) Price- from $100 Road Race and Autocross- We first talk with you to establish your handling preferences and driving style. We then install ballast to simulate drivers weight and fuel load as raced. After checking the ride height we perform a four wheel alignment that will best suit your vehicle and driving style. Price- from $100 Drag Car- We first install ballast to simulate driver weight and fuel load as raced. We then strap the rear of the car down to load the rear suspension and simulate the ride height of your vehicle during launch and as it goes down the strip. After taking several alignment measurements at different ride heights we then perform a four wheel alignment that will give your car the best traction at launch and make it go down the strip as straight as possible. Price- from $150
Corner Balancing Corner balancing greatly helps the handling of any type of race car. We perform all of our corner balancing on a leveled alignment rack. We place all four corners of your vehicle on individual computerized scale pads. We then adjust ride height to achieve a 50 percent cross weight for road race and autocross vehicles or a 50 percent rear side to side weight for drag race vehicles. This is all done with ballast installed in proper locations to simulate drivers weight and fuel load as raced. Price- from $130
937-609-3814
|
